SolarPool Heating Systems
Before you buy and install a solar pool heating system, you first need to consider your site's solar resource. The efficiency and design of a solar pool heater depends on how much of the sun's energy reaches your building site.
Most solar pool heating systems include the following:
- A solar collector - the device through which pool water is circulated to be heated by the sun
- A filter - removes debris before water is pumped through the collector
- A pump - circulates water through the filter and collector and back to the pool
- A flow control valve - automatic or manual device that diverts pool water through the solar collector.
Pool water is pumped through the filter and then through the solar collector(s), where it is heated before it is returned to the pool. In hot climates, the collector(s) can also be used to cool the pool during peak summer months by circulating the water through the collector(s) at night.
Sizing a solar swimming pool heating system involves many factors:
- Pool size
- Length of swimming season
- Average regional temperatures
- Desired pool temperature
- Site's solar resource
- Collector orientation and tilt
- Collector efficiency
- Use of a pool cover
Specification | Heating Series Heat Pipe TZ58/1800-20R |
Heating Series Heat Pipe TZ58/1800-30R |
---|---|---|
Number of tubes | 20 | 30 |
Frame & manifold | Aluminium | Aluminium |
Heating type | Copper Heat Pipe | Copper Heat Pipe |
Lenth of Tube | 1800mm | 1800mm |
OD of tube | 58 mm | 58 mm |
ID of tube | 50 mm | 50 mm |
Glass Thickness | 2 mm | 2 mm |
Water Capacity | 1.8 L (.4 gallons) | 2.6 L (.6 gallons) |
Weight dry | 175lbs | 220lbs |
Weigh Wet | 180 lbs | 230 lbs |
Max BTU/HR | 5000 BTU/hr | 7,517 BTU/hr |
Pressure | 116 psi | 116 psi |
Glass Vacuum Material | Borosilicate glass | Borosilicate glass |
Vacuum | P<5x10 -3 PA | P<5x10 -3 PA |
Frame | Included | Included |
Warranty | 10 years | 10 years |